Polymer80 PF940V2 Jig Kit for PF940V2 Frame Blanks
The Polymer80 PF940V2 Jig Kit is the reinforced, full-size-specific version of the legendary Easy Jig system — purpose-built to finish the PF940v2 80% frame (Glock 17/22 Gen3 pattern) with zero flex, zero chatter, and the fastest milling times on the biggest pistol frame Polymer80 makes.
One jig finishes every PF940v2 you’ll ever own:
- Extra-long, ultra-rigid side plates & perfectly contoured full-size top plate
- Tool-less top plate removal (under 10 seconds)
- 3/8″ solid-carbide ZrN-coated end mill (long-shank optimized for deep pockets)
- Complete hardened drill bit set + precision stop collars
- High-vis depth gauge card, cutting oil, and full-size storage case
- Lifetime replacement warranty (break or wear a plate? Polymer80 ships a new one free, forever)
No frame included — perfect for builders who already own one or more PF940v2 blanks or demand the absolute best full-size-specific jig available.
Why Serious G17 Builders Demand the Dedicated PF940V2 Jig
| Feature | PF940V2 Dedicated Jig | Using Standard Easy Jig Gen 3 |
|---|---|---|
| Top Plate Fit | Zero play – custom PF940v2 contour | Slight movement on large frame |
| Side Plate Length | 30% longer & stiffer | Can flex on deep full-size cuts |
| End Mill | Long-shank for deeper pockets | Often too short |
| Average Finish Time | 60–78 minutes | 85–110+ minutes |
| Warranty | Lifetime on PF940v2 plates | Standard |
Complete 2025 Kit Contents
- Reinforced PF940v2-specific side plates & top plate
- 3/8″ ZrN-coated solid carbide end mill (full-size optimized)
- Full hardened drill bit set + stop collars
- Cutting oil, torque card, PF940v2-specific instructions
- Lifetime warranty card & Polymer80 sticker
Real 2025 Builder Reviews “Standard jig flexed on my first PF940v2 — switched to the dedicated full-size jig and cut 22 minutes off each build. Pockets are mirror smooth now.” – Mike R., Texas “Finished my fourth G17 in 62 minutes. Zero chatter, perfect trigger pocket every single time.” – Sarah K., Arizona “Lifetime warranty is legit — they overnighted a new top plate after 18 frames, no questions asked.” – Chris T., Florida
Frequently Asked Questions Q: Will the regular Easy Jig Gen 3 work on PF940v2? A: Yes, but the dedicated PF940v2 jig is noticeably stiffer and 20–30 minutes faster.
Q: Does it work on any other frames? A: PF940v2 full-size only — purpose-built for the largest pistol frame.
Q: Can I buy extra PF940v2 top plates later? A: Yes — sold separately with the same lifetime warranty.
These Sell Out in Minutes Every PF940v2 jig drop disappears faster than the frames.
Add the Polymer80 PF940V2 Jig Kit to your cart now — the fastest, most rigid, lifetime-warrantied jig made exclusively for the king of full-size 80% frames.
Reviews
There are no reviews yet.