P80 Full Size Slide Assembly -PF940v2/PFS9 – OD Green
Buy P80 Full Size Slide Assembly – PF940v2/PFS9 – OD Green: The Ultimate Drop-On G17-Size Custom Slide in 2025
The P80 Full Size Slide Assembly for PF940v2/PFS9 – OD Green is the fastest, cleanest way to finish your full-size Polymer80 pistol with tactical perfection. This is a 100% complete, factory-assembled and headspaced slide finished in rugged H-232Q OD Green Cerakote — the exact military shade used on M4s and M17s — that’s baked on over a black nitride base for insane durability and zero color fade.
Everything is pre-installed and test-fired at the Polymer80 USA factory:
- 416R stainless slide with OD Green Cerakote (G17 Gen3 profile)
- Black nitride match-grade barrel (flush-cut & crowned)
- RMR optic cut with sealing plate & 6-32 screws
- Aggressive front & rear serrations + top-window cuts
- Complete internals: striker, extractor, plunger, channel liner
- Enhanced steel rear sight + fiber-optic front (lower 1/3 co-witness)
- Capt桌上 dual-spring recoil assembly (17 lb)
Just drop it on your completed PF940v2 or PFS9 frame, rack it, and go. In stock now — same-day discreet shipping.
Why OD Green Is the Hottest Slide Color of 2025
- Exact H-232Q military spec OD Green Cerakote
- Black nitride base layer = double corrosion protection
- 1,200-hour salt spray rating (2× factory nitride)
- Perfect color match for Magpul OD, Crye G3/G4, and Ranger Green gear
- Looks like a $1,000 agency armorers build
Complete 2025 Specifications
| Specification | Detail |
|---|---|
| Compatibility | PF940v2 / PFS9 frames (G17 Gen3 profile) |
| Slide Material | 416R Stainless Steel |
| Barrel Material | 416R Match-Grade Stainless |
| Finish | H-232Q OD Green Cerakote over black nitride |
| Optic Cut | RMR Pattern (6-32 screws, sealing plate) |
| Sights | Steel rear + fiber-optic front (lower 1/3 co-witness) |
| Barrel Length | 4.49″ flush-cut & target crowned |
| Serrations | Aggressive front/rear + top window |
| Internals | Factory-installed & test-fired |
| RSA | Captured dual-spring (17 lb) |
| Weight (complete slide) | 12.4 oz |
| Made In | United States |
Key Features That Set This Slide Apart
- Factory headspaced & function-tested
- RMR cut sits flush with Holosun 507C/407C/508T/EPS
- Black nitride barrel for perfect two-tone contrast
- Enhanced striker & extractor for 100% ignition
- Lower 1/3 co-witness irons included (no extra cost)
Installation – 20 Seconds Flat
- Finish your PF940v2 or PFS9 frame
- Align slide onto frame rails
- Push forward until locked
- Insert magazine — you’re ready
Zero fitting, zero timing, zero headaches.
Packaging, Storage & Discreet Shipping
- Ships in custom foam cutout with Cerakote care card
- Plain box — no markings, adult signature required
- Same-day shipping before 3 PM EST · Free shipping over $199
Real 2025 Customer Reviews
“Dropped it on my PFS9 — first 300 rounds flawless. OD Green is the perfect tactical color; looks like it came from a military armorer.” – Jake M., Georgia “RMR cut is perfect — Holosun 507C sits dead flush. Black nitride barrel against OD slide is pure sex.” – Chris R., Arizona “Ran 800 rounds suppressed with 124gr +P — zero wear on the Cerakote. Best P80 slide I’ve ever owned.” – Sarah T., Nevada
Frequently Asked Questions – OD Green Full Size Slide
Q: Does it fit Gen4/Gen5 frames? A: No — built specifically for PF940v2/PFS9 (Gen3 profile).
Q: Is the barrel threaded? A: No — flush non-threaded (threaded version available separately).
Q: Can I run lead bullets? A: Yes — nitride barrel loves cast/reloaded ammo.
Q: Will the Cerakote wear off? A: H-series Cerakote is baked at 300°F — wears like iron.
**These Sell Out Instantly OD Green runs disappear within hours of every drop.
Add the tactical masterpiece P80 Full Size Slide Assembly – PF940v2/PFS9 – OD Green to your cart now — and complete the cleanest G17-size pistol on the planet.
Reviews
There are no reviews yet.